WhisperPower System / Package
DC PowerCube 48 VDC - 80 A
48 VDC heavy-duty battery charger/power supply, up to 4.3 kW, with dual input from shore power (90–264 VAC) and Genverter PM generator, plus 12 V/20 A slave output.
Description
The WhisperPower DC PowerCube 48 VDC – 80 A (part number 60202003) is a heavy-duty battery charger and power supply for large DC systems with big battery banks and significant DC consumption on marine and mobile/off-grid installations. It converts grid or generator power to ripple-free DC for lighting, electronics, pumps and other loads, and can operate as a power supply without batteries.
Key features
- Up to 3.5 kW from shore power and up to 4.3 kW from a Genverter© PM generator
- Dual input: AC grid supplemented by Genverter© input with adjustable load and rpm
- Adjustable AC input current (2–16 A) to match any shore supply
- 3+ step charging for AGM, gel, open/sealed lead-acid, traction and lithium-ion batteries; selectable via laptop or dipswitch
- 12 VDC / 20 A 3-step slave output
- WhisperConnect CAN-bus for central monitoring; standard analogue panel supplied
- Relay outputs for status and failure; inputs to disable grid or PM input
Technical data
- Nominal battery voltage: 48 VDC; output current 0–100 A (short-circuit protected)
- Recommended battery capacity: 200–1000 Ah
- Grid input: 90–264 VAC, 45–65 Hz; PM generator input: 80–300 VAC, 30–500 Hz
- Power factor: >0.85
- Protection: IP21; derating above 40 °C; overvoltage protection 68 VDC
- Dimensions: 268 × 316 × 575 mm; weight 26 kg
Specifications
| 60202003 | DC PowerCube 48 V - 80 A |
|---|---|
| Weight kg (lb.) | 26 (57.3) |
| Length x width x height, mm (in.) | 268 x 316 x 575 (10.6 x 12.4 x 22.6) |
| Nominal battery voltage | 48 VDC |
| Output current | 0 - 100 A (short circuit protected) |
| Output voltage | 43.0 / 57.0 VDC |
| Recommended battery capacity: | 200 to 1000 Ah |
| charge characteristic | 3+ step charge characteristic |
| Slave charger | 12 V - 20 A (3+ step charge characteristic) short circuit protected |
| Grid input voltage range | 90 - 264 VAC (45 - 65 Hz), (3 wire connection) |
| Grid input current | Adjustable, from 2 A to 16 A |
| PM generator input range | 80 - 300 VAC (30 - 500 Hz), (3 wire connection) |
| PM input current | Adjustable, from 2 A to 14.5 A |
| Power factor (cos phi) | > 0.85 |
| Power Factor Correction (PFC) | EN 61000-3-2 |
| Temperature compensation | -60 mV / °C |
| Supported battery types | Open and sealed lead acid: Gel / Traction / AGM / Spiral and Lithium-ion |
| Battery leakage current | <5 mA per battery |
| Charge voltages | Bulk, Absorption, Float |
| Charge voltage AGM / GEL at 25°C | 57.60 VDC, 57.00 VDC, 54.40 VDC |
| Charge voltage Traction at 25°C | 58.40 VDC, 57.80 VDC, 53.00 VDC |
| Charge voltage Open lead acid at 25°C | 57.00 VDC, 57.00 VDC, 53.00 VDC |
| Charge voltage Lithium ION at 25°C | 57.60 VDC, 54.40 VDC, 53.00 VDC |
| Return current from absorption to float | 6% of Imax |
| PowerCube status on/off | Digital output (relay, two-way contact) |
| Failure | Digital output (relay, two-way contact) |
| AC grid disabled | Digital input (potential free input, closed is disabled) |
| PM input disabled | Digital input (potential free input, closed is disabled) |
| Conformity | Directive EMC 2004/108/EC : EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022,EN 61000-3-2, 62040-2 Low voltage directive 2006/95/EC: EN 62040-1-1, EN 50091-2, EN 60950-1 |
| PM input isolation protection | Yes (open collector output 30 VDC, 100 mA) |
| Over temperature protection | Yes, derating above 40°C, shutdown at high temperatures. (with automatic restart after cooling down) |
| Overvoltage protection (manual restart needed) | 68 VDC +/- 0.5 VDC |
| Ingress Protection index | IP21 |
| Main battery connection | 2 x M10 studs |
| Slave battery connection | 1 x M5 stud |
| Earth grounding lug | 1 x M6 stud |
| AC grid input | 3 x M3 screw terminal block |
| PM grid input | 3 x M3 screw terminal block |
| Remote control panel | RJ12 |
| Battery temperature sensor | RJ12 |
| Whisper Connect CANbus | RJ45 |
| Voltage sense | Phoenix MSTB 2.5 / 2-ST-5.08 |
| Digital outputs | 6 x fastons (6.3 x 0.8) |
| Digital inputs | 4 x fastons (6.3 x 0.8) |
| Operating temperature range | -20 - 55°C (derating above 40°C) |
| Relative humidity in operation | up to 95% without condensation |
| Ventilation | Combined cooling (convection and forced (variable speed)) |
| Acoustic level | <52 dB |
| Warranty | 2 years |
| Accessories | Battery temperature sensor and remote control panel |
More from WhisperPower
- WhisperPower Supreme 12 VDC - 40 A
- WhisperPower AC PowerCube 24 VDC – 14000 VA
- WhisperPower AC PowerCube 24 VDC – 7000 VA
- WhisperPower AGM battery 12 V - 100 Ah
- WhisperPower AGM Battery 12 V - 145 Ah
- WhisperPower AGM Battery 12 V - 200 Ah
- WhisperPower AGM Battery 12 V - 260 Ah
- WhisperPower AGM Battery 12 V - 55 Ah
- WhisperPower AGM Battery 12 V - 80 Ah
- WhisperPower Alternator 12 V
- WhisperPower Battery Equalizer 24 VDC
- WhisperPower DC PowerCube 24 VDC - 150 A
Featured products
All products →
System / Package
LNG Fuel Gas Supply System (FGSS)
Marine LNG fuel gas supply system for newbuild and retrofit dual-fuel vessels, conditioning and delivering LNG to engines with controlled pressure, temperature and flow; for tankers, container ships, LNG carriers and Ro-Ro.
System / Package
Supreme 12 VDC - 40 A
Automatic 12 V, 40 A battery charger with three independent outputs, programmable for AGM, GEL, wet and lithium, universal 90–265 VAC input; CE and ABYC compliant.
Accessory
Fresh Water Filling
Automated function that drains sea water from the BWTS filter and refills it with fresh water to stop organisms clogging the mesh.
Similar products