Thordon Bearings System / Package
Thordon Water Quality Package
Thordon Water Quality Package supplies seawater to propeller shaft bearings at 0.15 l/min/mm (1 US gpm/in) of shaft diameter and removes solids over 100 microns (80 microns with the 75–150 l/min unit). Has a flow alarm and can integrate with ship systems.
Description
The Thordon Water Quality Package supplies seawater to water-lubricated propeller shaft bearings for lubrication and cooling, and filters the water before it reaches them.
Key features
- Minimum flow of 0.15 litre/minute/mm (1 US gallon/minute/inch) of shaft diameter
- Removes suspended solids larger than 100 microns (0.004 in.) with a specific gravity of 1.2 or higher
- Separation down to 80 microns (0.003 in.) with the 75–150 l/min (20–40 GPM) unit
- Flow alarm warns of low water flow to the bearings
- Runs stand-alone or fully integrated with the ship's control and monitoring system, for unmanned machinery spaces
Configurations
- Three package configurations to suit a wide range of shaft sizes and to give the right degree of redundancy for each vessel
- Special arrangements for specific installations can be developed with integrators, designers and builders
More from Thordon Bearings
- Thordon Bearings Thordon COMPAC and SXL Propeller Shaft Bearings for Fishing Vessels
- Thordon Bearings Thordon RiverTough and SXL Propeller Shaft Bearings
- Thordon Bearings Thordon Shaft Seals for Fishing Vessels (TG100)
- Thordon Bearings Thordon Shaft Seals for Workboats and Tugs (TG100)
- Thordon Bearings Thordon SXL Rudder Bearings for Coastal Workboats
- Thordon Bearings Thordon SXL Rudder Bearings for Fishing Vessels
- Thordon Bearings Thordon SXL Rudder Bearings for Workboats and Tugs
- Thordon Bearings Thordon TG100 Tailshaft Seal for Coastal Workboats
- Thordon Bearings Thordon TG100 Tailshaft Seal for Fishing Vessels
- Thordon Bearings Thordon TG100 Tailshaft Seal for Workboats and Tugs
Featured products
All products →
Component
Low Inertia High Torque Clutch
Pneumatic low inertia high torque (LIHT) clutch with pancake-style airtube for the highest torque-to-size ratio in the WPT range; suited to marine winches, steel shears and metal forming.
Consumable
HYDROX 550
Emulsifiable mineral sterntube oil (ISO 68) for regular running and some stabilisers; Class tested, verified by Lloyd's Register, approved by major seal makers.
Equipment
Flaig FX Lift Magnets
Flaig Magnetsysteme lift magnets, offered by IMI under an exclusive North American partnership, for flat, angle, thin-sheet and cylindrical parts.
Similar products