Alfa Laval Equipment
Aalborg H/HW
Waste heat recovery boiler for gas or diesel engines, steam (H) or hot water (HW).
Description
Aalborg H/HW is a waste heat boiler for use after gas or diesel engines, built from bare smoke tubes welded to tube plates. Aalborg H generates steam with natural circulation; Aalborg HW produces hot water with forced circulation.
Key features
- Horizontal or vertical installation
- Integrated exhaust gas bypass for capacity modulation
- Exhaust gas inlet temperature below 530 C, typical operating pressure below 20 bar(g), typical pinch point above 20 C
Applications
- A good match for HFO heating or low to moderate steam demand.
Specifications
| Exhaust gas inlet temperature | < 530 °C |
|---|---|
| Typical operating pressure | < 20 bar(g) |
| Typical pinch point | > 20 °C |
More from Alfa Laval
Featured products
All products →
Equipment
Windshield Boats
Welded aluminum windshield boats (16 EXW, 18 OPW, 19 GTX) on Klamath's open-boat hulls, with all-welded windshields, grab rails and an optional full canvas top.
Spare Part
VETUS Shaft Seals and Flexible Inner Bearings
Flexible inner bearings with shaft seals for water-lubricated stern gear: ZWBH monoblock with triple lip seal (25–40 mm) and bronze versions with dual lip seal (25–60 mm), plus replacement seal sets.
Equipment
Ocean Guard™ Utility, Support, Universal, Chain-Through & Oceanographic Buoys
Foam-filled steel-cored buoys for marking, hose and rope pickup, anchor pendants, chain-through moorings and oceanographic instruments.