Master Bond Consumable
Structural Epoxy Adhesives
One and two component structural epoxies that produce assemblies mechanically equivalent to or stronger than metal-fastened parts, at lower cost and weight.
Description
Master Bond one and two component structural adhesives bond similar and dissimilar substrates and distribute stress over the whole bonded area instead of concentrating it at fasteners. They insulate against galvanic corrosion in metal assemblies, seal against liquids and gases, and resist cyclic fatigue.
Featured grades
- Supreme 10HT – one part epoxy, oven cured at 250–300°F, for composites; NASA low outgassing approved; serviceable from 4K to +400°F
- Supreme 42HT-2 – toughened high temperature epoxy resistant to acids, bases, solvents, fuels and oils; -80°F to +450°F
- Supreme 11AOHT-LO – thermally conductive, toughened paste with a one to one mix ratio; NASA low outgassing
Applications
Structural bonding of metals, composites and dissimilar materials where weight saving and corrosion isolation matter.
Specifications
| Supreme 10HT service range | 4k to +400°F |
|---|---|
| Supreme 10HT cure | oven curing at 250-300°F |
| Supreme 42HT-2 service range | -80°F to +450°F |
More from Master Bond
- Master Bond One Component Epoxy Systems
- Master Bond B-Stage Epoxy Systems
- Master Bond Epoxy Adhesive Films & Preforms
- Master Bond UV Curable Adhesives
- Master Bond LED Light Curable Adhesives
- Master Bond UV Curing Potting Compounds
- Master Bond UV Curable Scratch Resistant Coatings
- Master Bond Potting and Encapsulation Compounds
- Master Bond Conformal Coatings
- Master Bond Silicone Systems (MasterSil)
- Master Bond Polysulfide Modified Epoxies
- Master Bond Urethane Modified Epoxies
Featured products
All products →
Equipment
870V53 Advanced Shock-Mitigating Bolster
Stand-up shock-mitigating bolster with a suspension proven in Sea State 4 at 50+ knots aboard the MKV Special Operations Craft.
Component
Low Inertia High Torque Clutch
Pneumatic low inertia high torque (LIHT) clutch with pancake-style airtube for the highest torque-to-size ratio in the WPT range; suited to marine winches, steel shears and metal forming.
Equipment
Bow and Stern Thrusters
Full line of hydraulic (5 to 160 HP, 200 to 4,000 lb thrust) and electric (5 to 14 HP, 125 to 550 lb thrust) bow and stern thrusters in aluminum or bronze finish.