Kobelt Equipment
Kobelt Push-Pull Propulsion Controls
Kobelt mechanical push-pull engine and clutch controls with control heads, cables and connection kits, for vessels with one or two stations and cable runs typically under 50 ft (15 m).
Description
Kobelt Push-Pull Propulsion Controls are mechanical engine control systems that use cables to connect the control head to the clutch and throttle. They suit boats with one or two control stations and a total cable length under 50 ft (15 m); some vessels run up to 80 ft (24 m) of push-pull cable successfully, depending on bends and the ease of operating the clutch and engine interfaces. For longer runs, electronic controls are an alternative.
Control heads
- Separate clutch and throttle handles, or single-lever combined control (forward/reverse clutch engagement, then increasing speed)
- Finishes: polished brass, polished chrome or black epoxy
- Adjustable friction or detent; choice of handle lengths
- Neutral safety switches available for all models; stroke limitation screws on one- and two-handle heads
- Removable domes for installation and adjustment
- In-house bronze die casting and precision machining
Cables and accessories
- Push-pull cables and cable connection kits (33 series and 43 series)
- Rod ball ends for engine and clutch connection
- Electronic clutch control adaptor for electrically actuated clutches
- Neutral safety switch kit to prevent engine start while in gear
More from Kobelt
- Kobelt 7176 Walk-About Controller
- Accu-Steer Autopilot Pumps & HPUs
- Kobelt Propulsion Brake Systems
- Kobelt SPM Brake Systems
- Kobelt Manufacturing Kobelt Hydraulic Steering Systems
- Kobelt Manufacturing Kobelt Marine Steering Cylinders
- Kobelt Manufacturing Kobelt Power Assist Steering
- Kobelt Pneumatic Controls
- Keypower Digital Fin Stabilizers
- Kobelt Manufacturing 7168: Rudder Angle Feedback Unit
- Kobelt Manufacturing 7170: Jog Lever
- Kobelt Manufacturing 7174: Rudder Angle Feedback Unit
Featured products
All products →
System / Package
OMEGA Reinforced Laser Plate Banks for Cargo Hold Heating
Structurally reinforced stainless laser-plate heat-exchanger banks that replace failing pipe coils in barge and tanker cargo holds — built to survive sloshing loads in part-filled tanks while heating crude oil, caustic soda and other cargoes.
Equipment
Beta 25 Saildrive Engine (18.5 kW / 25 hp)
Beta 25 marine diesel engine with shallow sump, 18.5 kW / 25 hp @ 3,600 rpm, supplied with a Technodrive SeaProp 60 saildrive or with adaptor kits for existing Volvo 110S/120S/130S, Yanmar SD20 or Bukh saildrives. EPA Tier III compliant.
Equipment
Naval Steam Turbines
Mechanical-drive steam turbines for U.S. Navy ships: main propulsion, ship service and emergency turbine generator sets, and auxiliary pump drives.
Similar products