Eureka Chemical Company Consumable
FLUID FILM BLACK® Aerosol & Non-Aerosol
Black-tinted version of the FLUID FILM® wool-wax penetrant and lubricant, used as a corrosion-preventive undercoating that creeps into seams.
Description
FLUID FILM BLACK® is a penetrant and lubricant also used for corrosion prevention, based on the same wool-wax formulation as FLUID FILM®. It is non-toxic, solvent-free and will not dry out. It has been introduced in the automotive and snow-handling industries as a vehicle undercoating: the wet barrier creeps into tight seams and metal chassis to protect against salts and brines, while restoring a black color or covering existing rust.
Key features
- Black colored liquid; flash point 405°F minimum (bulk liquid, ASTM-92 Cleveland Open Cup)
- Non-volatile 89% minimum (3 hours @ 220°F)
- VOC (CARB 310): aerosol less than 25%, non-aerosol less than 1%
- Specific gravity 0.875–0.885 (less propellant)
- Aerosol and non-aerosol versions
Applications
- Undercoating of vehicles and snow-handling equipment
- Corrosion protection of exposed metal where a black finish is wanted
Specifications
| Appearance | black colored liquid |
|---|---|
| Flash point, bulk liquid (ASTM-92 Cleveland Open Cup) | 405°F minimum |
| Non-volatile | 89% minimum (3 hours @ 220°F) |
| VOC (CARB 310) | AS: Less than 25%, NAS: Less than 1% |
| Specific gravity | 0.875 - 0.885 (less propellant) |
More from Eureka Chemical Company
Featured products
All products →
Equipment
GALA Inflatables & Aquahelm Console
GALA aluminum RIBs and the Aquahelm lightweight console kit that converts 10'–13' GALA dinghies to remote steering.
Equipment
Bow and Stern Thrusters
Full line of hydraulic (5 to 160 HP, 200 to 4,000 lb thrust) and electric (5 to 14 HP, 125 to 550 lb thrust) bow and stern thrusters in aluminum or bronze finish.
Equipment
Everllence B&W ME-LGIM Methanol Dual-Fuel Engine
Low-speed two-stroke dual-fuel engine running on methanol or conventional marine fuels, in service since 2016 with over 600,000 hours on methanol; 6,950–82,440 kW, 56–125 rpm, for newbuilds and retrofits.