Carver Pump Equipment
KWP
Non-clogging horizontal pump for fluids with entrained solids and fibrous materials up to 1.5″ diameter.
Description
The KWP is a non-clogging horizontal pump that handles fluids containing entrained solids and fibrous materials up to 1.5″ in diameter. A two-vane enclosed impeller with wide passages keeps solids moving through the pump. It is available frame-mounted or close-coupled and handles flows to 1,300 GPM and heads to 240 ft.
Key features
- Two-vane enclosed impeller with wide passages
- Soft packing or single/double cartridge seals
- Back pull-out design
- Shaft deflection limited to 0.002″ at the seal
Applications
- Wastewater
- Gray water
- Coating systems
Specifications
| Flows to | 1,300 GPM (300 m3/hr) |
|---|---|
| Heads to | 240 ft. (100 m) |
| Solids to | 1-1/2 in. diameter (38 mm) |
| Power to | 50 HP (40 KW) |
| Speeds to | 3,550 RPM |
| Temperatures to | 250° F (120° C) |
More from Carver Pump
Featured products
All products →
Component
Miscellaneous Equipment & Parts
Assorted marine and industrial equipment and components, including compressors, winches, heat exchangers, intercoolers, crankshafts, main bearings and governors.
Equipment
Flaig FX Lift Magnets
Flaig Magnetsysteme lift magnets, offered by IMI under an exclusive North American partnership, for flat, angle, thin-sheet and cylindrical parts.
Equipment
Bow and Stern Thrusters
Full line of hydraulic (5 to 160 HP, 200 to 4,000 lb thrust) and electric (5 to 14 HP, 125 to 550 lb thrust) bow and stern thrusters in aluminum or bronze finish.