Bartington Instruments System / Package
Mag613 8-sensor magnetometer array
Array of eight miniature three-axis fluxgate sensors for analysing magnetic signatures of ship and submarine scale models in pressurised tanks.
Description
Mag613 is an array of eight miniature three-axis fluxgate magnetometer sensors designed for use in an oil-filled tank at pressures equivalent to 500m depth (50 bar). It is intended for analysing the magnetic signatures of ship and submarine scale models and for simulating closed-loop degaussing. Each sensor sits in a miniature enclosure and is connected by a 3m cable to an electronics module containing the power supply, drive circuitry and an analogue multiplexer. The small sensor volume allows mounting for high spatial resolution, and crosstalk is suppressed up to 3kHz. An export licence is required for shipment outside the UK.
Key features
- Eight three-axis sensors rated to 50 bar
- Range of ±300μT or ±500μT
- 6Hz bandwidth
- Remote test facility for fault diagnosis
- Outputs multiplexed into a single analogue line
Applications
- Magnetic signature analysis of ship and submarine scale models
- Simulating closed-loop degaussing
Specifications
| Sensors | 8 three-axis |
|---|---|
| Pressure rating | 50 bar (500m equivalent) |
| Measuring range | ±300μT or ±500μT |
| Bandwidth | 6Hz |
| Sensor cable | 3m |
More from Bartington Instruments
- Bartington Mag-03RCU range magnetometers
- Bartington Mag648 / Mag649 low-noise magnetometers
- Bartington Mag-13 three-axis fluxgate magnetometers
- Bartington Mag-03 three-axis fluxgate magnetometers
- Bartington Mag646/710 three-orientation magnetometers
- Bartington Mag644 single-axis fluxgate probe
- Bartington Grad-13 digital three-axis gradiometer
- Bartington Helmholtz coil systems
- Bartington BHC2000 Ferronato Helmholtz coils
- Bartington Helmholtz Control System
- Bartington DAS1 / DAS3 multi-sensor data acquisition
- Bartington Spectramag-6 data acquisition unit
Featured products
All products →
Component
Miscellaneous Equipment & Parts
Assorted marine and industrial equipment and components, including compressors, winches, heat exchangers, intercoolers, crankshafts, main bearings and governors.
Equipment
Flaig FX Lift Magnets
Flaig Magnetsysteme lift magnets, offered by IMI under an exclusive North American partnership, for flat, angle, thin-sheet and cylindrical parts.
Equipment
Bow and Stern Thrusters
Full line of hydraulic (5 to 160 HP, 200 to 4,000 lb thrust) and electric (5 to 14 HP, 125 to 550 lb thrust) bow and stern thrusters in aluminum or bronze finish.