Tube-Mac Piping Technologies Component
37° Flare Flange
Non-welded 37° flared pipe connection for 1/2" to 10" pipe at up to 6,000 PSI (420 bar), with ABS, DNV, LR and CCS certification.
Description
The 37° flare flange connection flares pipe ends to 37° and joins them with flare flanges and two cone inserts per union (one O-ring face, one flat face), both with backup O-rings. The flange is slipped on before flaring, the cone is inserted, and bolting draws the flared pipes and cones together, avoiding welding on board.
Key features
- Pipe sizes 1/2" to 10"; pressures up to 6,000 PSI (420 bar), depending on size
- Flanges rotate freely for easy bolt alignment
- Flaring and installation measured in minutes versus hours for welding
- Clean connection with reduced commissioning and oil flushing time
- Conforms to SAE Code 61 / ISO 6162-1, SAE Code 62 / ISO 6162-2 and ISO 6164; custom patterns on request
- Certifications: ABS, DNV, Lloyd's Register, CCS; compliance with ASME B31.1 and B31.3
Applications
- Hydraulics, greases, lubes, oil, water, nitrogen, air and other media
Specifications
| Size range | 1/2 in - 10 in |
|---|---|
| Pressure | up to 6,000 PSI (420 bar), depending on size |
| Flange standards | SAE Code 61 / ISO 6162-1, SAE Code 62 / ISO 6162-2, ISO 6164 |
| Class approvals | ABS, DNV, Lloyd's Register, CCS |
More from Tube-Mac Piping Technologies
- Tube-Mac Butt Welded Hub Technology
- Tube-Mac Piping Components and Accessories
- Tube-Mac Piping Selection, Design and Layout
- Tube-Mac Prefabricated Piping Systems
- Tube-Mac Installation Services and Project Management
- Tube-Mac Retain Ring Flange
- Pyplok® Cold-Swaged Fittings
- PreFiS® Non-Welded Press Fitting System
- Tube-Mac Pipe, Hose and Tube Clamps
- Tube-Mac Oil Flushing and Pressure Testing
Featured products
All products →
System / Package
OMEGA Reinforced Laser Plate Banks for Cargo Hold Heating
Structurally reinforced stainless laser-plate heat-exchanger banks that replace failing pipe coils in barge and tanker cargo holds — built to survive sloshing loads in part-filled tanks while heating crude oil, caustic soda and other cargoes.
Equipment
Beta 25 Saildrive Engine (18.5 kW / 25 hp)
Beta 25 marine diesel engine with shallow sump, 18.5 kW / 25 hp @ 3,600 rpm, supplied with a Technodrive SeaProp 60 saildrive or with adaptor kits for existing Volvo 110S/120S/130S, Yanmar SD20 or Bukh saildrives. EPA Tier III compliant.
Equipment
Naval Steam Turbines
Mechanical-drive steam turbines for U.S. Navy ships: main propulsion, ship service and emergency turbine generator sets, and auxiliary pump drives.